Adafruit Lithium Ion Polymer Battery - 3.7v 1200mAh

Adafruit Lithium Ion Polymer Battery - 3.7v 1200mAh
  • Lithium Ion Polymer Battery - 3.7v 1200mAh 100x80
  • Lithium Ion Polymer Battery - 3.7v 1200mAh 100x80
  • Lithium Ion Polymer Battery - 3.7v 1200mAh 100x80
Artikelnr.52978
MerkAdafruit
Model258
Voorraad
Nog ... stuk op voorraad
Vandaag besteld, dinsdag 23 juli in huis.
Verzonden vanaf  € 25 - United States
Verkocht per stuk
€ 13,95
In winkelwagen
  • Koop 10 stuks voor € 13,55 per stuk3% korting
  • Koop 25 stuks voor € 13,20 per stuk5% korting
  • Koop 50 stuks voor € 12,80 per stuk8% korting
  • Koop 100 stuks voor € 12,45 per stuk11% korting
  • Koop 500 stuks voor € 12,05 per stuk14% korting

Beschrijving

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 1200mAh for a total of about 4.5 Wh. If you need a larger battery, we also have a 2500mAh+ model

The batteries come pre-attached with a genuine 2-pin JST-PH connector as shown and include the necessary protection circuitry. Because they have a genuine JST connector, not a knock-off, the cable wont snag or get stuck in a matching JST jack, they click in and out smoothly.

The included protection circuitry keeps the battery voltage from going too high (over-charging) or low (over-use) which means that the battery will cut-out when completely dead at 3.0V. It will also protect against output shorts. However, even with this protection it is very important that you only use a LiIon/LiPoly constant-voltage/constant-current charger to recharge them and at a rate of 500mA or less.
Like most lipos, the batteries we sell do not have thermistors built in. This is why we suggest charging at 1/2C or even less - 500mA max in this case which is how much you can get from a USB port.

Additional safety notes: Do not use a NiMH/NiCad/lead-acid charger! Also, do not abuse these batteries, do not short, bend, crush or puncture. Never charge or use unattended. Always inspect batteries and surrounding circuitry constantly for any damage, loose wiring, or possibility of short circuits. Polarity matches all Adafruit LiPoly/LiIon chargers and boards, other brands may have reverse polarity and can destroy your battery. As with all Lithium ion polymer batteries and with any power source - they should be used by experts who are comfortable working with power supplies.

Technical details:
  • Weight: 23g
  • Dimensions: 34mm x 62mm x 5mm / 1.3" x 2.4" x 0.2"
  • Output: 1200mAh at 3.7V nominal
  • Battery datasheet
  • Battery test report
  • MSDS Report

Eigenschappen

Spanning3,7 V
Opslag capaciteit1,2 AH
Type batterijLithium Ion

Vraag en antwoord

Beoordelingen

Er zijn nog geen beoordelingen achtergelaten voor dit product .



Logo Adafruit Lithium Ion Polymer Battery - 3.7v 1200mAh
Adafruit Lithium Ion Polymer Battery - 3.7v 1200mAhKlik op een ster om een beoordeling te geven