Adafruit TSL2561 Digital Luminosity/Lux/Light Sensor Breakout

Adafruit TSL2561 Digital Luminosity/Lux/Light Sensor Breakout
  • Adafruit TSL2561 Digital Luminosity/Lux/Light Sensor Breakout 100x80
  • Adafruit TSL2561 Digital Luminosity/Lux/Light Sensor Breakout 100x80
  • Adafruit TSL2561 Digital Luminosity/Lux/Light Sensor Breakout 100x80
Artikelnr.P439
MerkAdafruit
Model439
Voorraad
Levertijd 3 tot 10 werkdagen
Vandaag besteld, ongeveer dinsdag 30 juli in huis.
Verzonden vanaf  € 25 - United States
Verkocht per stuk
€ 7,55
In winkelwagen
  • Koop 10 stuks voor € 7,40 per stuk2% korting
  • Koop 25 stuks voor € 7,25 per stuk4% korting
  • Koop 50 stuks voor € 7,05 per stuk7% korting
  • Koop 100 stuks voor € 6,90 per stuk9% korting
  • Koop 500 stuks voor € 6,75 per stuk11% korting

Beschrijving

The TSL2561 luminosity sensor is an advanced digital light sensor, ideal for use in a wide range of light situations. Compared to low cost CdS cells, this sensor is more precise, allowing for exact lux calculations and can be configured for different gain/timing ranges to detect light ranges from up to 0.1 - 40,000+ Lux on the fly. The best part of this sensor is that it contains both infrared and full spectrum diodes! That means you can separately measure infrared, full-spectrum or human-visible light. Most sensors can only detect one or the other, which does not accurately represent what human eyes see (since we cannot perceive the IR light that is detected by most photo diodes)

New! As of June 3, 2014 we are shipping a version with a 3.3V regulator and level shifting circuitry so it can be used with any 3-5V power/logic microcontroller.

The sensor has a digital (i2c) interface. You can select one of three addresses so you can have up to three sensors on one board - each with a different i2c address. The built in ADC means you can use this with any microcontroller, even if it doesn't have analog inputs. The current draw is extremely low, so its great for low power data-logging systems. about 0.5mA when actively sensing, and less than 15 uA when in powerdown mode.

Details:
  • Approximates Human eye Response
  • Precisely Measures Illuminance in Diverse Lighting Conditions
  • Temperature range: -30 to 80 *C
  • Dynamic range (Lux): 0.1 to 40,000 Lux
  • Voltage range: 2.7-3.6V
  • Interface: I2C
  • This board/chip uses I2C 7-bit addresses 0x39, 0x29, 0x49, selectable with jumpers

Vraag en antwoord

Beoordelingen

Er zijn nog geen beoordelingen achtergelaten voor dit product .



Logo Adafruit TSL2561 Digital Luminosity/Lux/Light Sensor Breakout
Adafruit TSL2561 Digital Luminosity/Lux/Light Sensor BreakoutKlik op een ster om een beoordeling te geven