2.8" TFT LCD with Touchscreen Breakout Board w/MicroSD Socket

2.8" TFT LCD with Touchscreen Breakout Board w/MicroSD Socket
  • 2.8" TFT LCD with Touchscreen Breakout Board w/MicroSD Socket 100x80
  • 2.8" TFT LCD with Touchscreen Breakout Board w/MicroSD Socket 100x80
  • 2.8" TFT LCD with Touchscreen Breakout Board w/MicroSD Socket 100x80
  • 2.8" TFT LCD with Touchscreen Breakout Board w/MicroSD Socket 100x80
  • 2.8" TFT LCD with Touchscreen Breakout Board w/MicroSD Socket 100x80
  • 2.8" TFT LCD with Touchscreen Breakout Board w/MicroSD Socket 100x80
Artikelnr.P1770
MerkAdafruit
Model1770
Voorraad
Nog ... stuks op voorraad
Vandaag voor 23:59 besteld, morgen in huis.
Verkocht per stuk
€ 33,95
In winkelwagen
  • Koop 10 stuks voor € 33,55 per stuk1% korting
  • Koop 25 stuks voor € 33,20 per stuk2% korting
  • Koop 50 stuks voor € 32,80 per stuk3% korting
  • Koop 100 stuks voor € 32,40 per stuk5% korting
  • Koop 500 stuks voor € 32,05 per stuk6% korting

Beschrijving

Add some jazz & pizazz to your project with a color touchscreen LCD. This TFT display is big (2.8" diagonal) bright (4 white-LED backlight) and colorful! 240x320 pixels with individual RGB pixel control, this has way more resolution than a black and white 128x64 display. As a bonus, this display has a resistive touchscreen attached to it already, so you can detect finger presses anywhere on the screen. We also have a version of this display breakout with a capacitive touchscreen.

This display has a controller built into it with RAM buffering, so that almost no work is done by the microcontroller. The display can be used in two modes: 8-bit and SPI. For 8-bit mode, you'll need 8 digital data lines and 4 or 5 digital control lines to read and write to the display (12 lines total). SPI mode requires only 5 pins total (SPI data in, data out, clock, select, and d/c) but is slower than 8-bit mode. In addition, 4 pins are required for the touch screen (2 digital, 2 analog) or you can purchase and use our resistive touchscreen controller (not included) to use I2C or SPI

We wrapped up this display into an easy-to-use breakout board, with SPI connections on one end and 8-bit on the other. Both are 3-5V compliant with high-speed level shifters so you can use with any microcontroller. If you're going with SPI mode, you can also take advantage of the onboard MicroSD card socket to display images. (microSD card not included, but any will work)

Of course, we wouldn't just leave you with a datasheet and a "good luck!". For 8-bit interface fans we've written a full open source graphics library that can draw pixels, lines, rectangles, circles, text, and more. For SPI users, we have a library as well, its separate from the 8-bit library since both versions are heavily optimized. We also have a touch screen library that detects x, y and z (pressure) and example code to demonstrate all of it.

Vraag en antwoord

Beoordelingen

Er zijn nog geen beoordelingen achtergelaten voor dit product .



Logo 2.8" TFT LCD with Touchscreen Breakout Board w/MicroSD Socket
2.8" TFT LCD with Touchscreen Breakout Board w/MicroSD SocketKlik op een ster om een beoordeling te geven