Adafruit Perma-Proto HAT voor de Raspberry Pi Mini Kit - Met EEPROM

Adafruit Perma-Proto HAT voor de Raspberry Pi Mini Kit - Met EEPROM
  • Adafruit Perma-Proto HAT for Pi Mini Kit - With EEPROM 100x80
  • Adafruit Perma-Proto HAT for Pi Mini Kit - With EEPROM 100x80
  • Adafruit Perma-Proto HAT for Pi Mini Kit - With EEPROM 100x80
  • Adafruit Perma-Proto HAT for Pi Mini Kit - With EEPROM 100x80
  • Adafruit Perma-Proto HAT for Pi Mini Kit - With EEPROM 100x80
Artikelnr.ADA2314
MerkAdafruit
Model2314
Voorraad
Nog ... stuks op voorraad
Vandaag voor 23:59 besteld, morgen in huis.
Verzonden vanaf  € 25 - United States
Verkocht per stuk
€ 8,95
In winkelwagen
  • Koop 10 stuks voor € 8,85 per stuk1% korting
  • Koop 25 stuks voor € 8,75 per stuk2% korting
  • Koop 50 stuks voor € 8,65 per stuk3% korting
  • Koop 100 stuks voor € 8,55 per stuk4% korting
  • Koop 500 stuks voor € 8,45 per stuk6% korting

Beschrijving

Design your own Pi HAT, attach custom circuitry and otherwise dress your Raspberry Pi with this jaunty prototyping HAT kit with EEPROM

To kick off the Adafruit HAT party, we have this Perma-Proto inspired plug in daughter board. It has a grid of 0.1" prototyping soldering holes for attaching chips, resistors, LED, potentiometers and more. The holes are connected underneath with traces to mimic the solderless breadboards with which you're familiar. There's also long power strips for +3V, +5V and Ground connections to the Pi. Near the top we break out nearly every pin you could want to connect to the Pi (#26 didn't quite make the cut).

This is the fancier version of our Perma-Proto HAT. It comes with a printed circuit board and a single 2x20 GPIO Header for Raspberry Pi to put your Perma-Proto on top of your Raspberry Pi (like a nice little hat...) This version comes with a blank 24C32 I2C EEPROM soldered on and connected to the EEDAT/EECLK lines so you cannot 'stack' it with other HATs. However, you can program in the EEPROM to make a self-identifying setup using the Pi Foundations' HAT specs - please note the specifications are still under development.

You can customize your Perma-Proto setup using a standard 2x20 stacking header or extra tall 2x20 stacking header. You can also swap out the 2x20 header with a slim 2x20 type if you want it to sit closer to the Pi, or an extra tall one if you want it to sit above the USB/Ethernet ports.

A bit of light soldering is required to attach the header to the PCB but it's easy work.

This hat is only compatible with the Raspberry Pi Zero, A+, B+, 2, 3, etc (any Pi with 2x20 connector)! It will not work with the Raspberry Pi Model A or B with 2x13 connectors

Vraag en antwoord

Beoordelingen

Er zijn nog geen beoordelingen achtergelaten voor dit product .



Logo Adafruit Perma-Proto HAT voor de Raspberry Pi Mini Kit - Met EEPROM
Adafruit Perma-Proto HAT voor de Raspberry Pi Mini Kit - Met EEPROMKlik op een ster om een beoordeling te geven