Live chat

MPL115A2 - I2C Barometric Pressure/Temperature Sensor

MPL115A2 - I2C Barometric Pressure/Temperature Sensor
  • MPL115A2 - I2C Barometric Pressure/Temperature Sensor 100x80
  • MPL115A2 - I2C Barometric Pressure/Temperature Sensor 100x80
Levertijd 3 tot 10 werkdagen
Vandaag besteld, ongeveer vrijdag 31 januari in huis.
Verzonden vanaf  € 25 - United States
Verkocht per stuk
€ 8,75
In winkelwagen
  • Koop 10 stuks voor € 8,60 per stuk2% korting
  • Koop 25 stuks voor € 8,45 per stuk3% korting
  • Koop 50 stuks voor € 8,35 per stuk5% korting
  • Koop 100 stuks voor € 8,20 per stuk6% korting
  • Koop 500 stuks voor € 8,05 per stuk8% korting


This pressure sensor from Freescale is a great low-cost sensing solution for measuring barometric pressure. At 1.5 hPa resolution, it's not as precise as our favorite pressure sensor, the BMx280 series, which has up to 0.03 hPa resolution so we don't suggest it as a precision altimeter. However, it's great for basic barometric pressure sensing. The sensor is soldered onto a PCB with 10K pull-up resistors on the I2C pins.

This chip is good for use with power and logic voltages ranging from 2.4V to 5.5V so you can use it with your 3V or 5V microcontroller. There's a basic temperature sensor inside but there's no specifications in the datasheet so we're not sure how accurate it is.

This chip looks and sounds a whole lot like the MPL3115A2 but this is the less precise version, best for barometric sensing only

Using the sensor is easy. For example, if you're using an Arduino, simply connect the VDD pin to the 5V voltage pin, GND to ground, SCL to I2C Clock (Analog 5 on an UNO) and SDA to I2C Data (Analog 4 on an UNO). Then download our MPL115A2 Arduino library and example code for temperature, pressure and basic altitude calculation. Install the library, and load the example sketch. Immediately you'll have the temperature, pressure and altitude data printed in the serial console.

Vraag en antwoord


Er zijn nog geen beoordelingen achtergelaten voor dit product .

MPL115A2 - I2C Barometric Pressure/Temperature SensorKlik op een ster om een beoordeling te geven